“Crews were essentially getting a reading from E.H. Wachs that they had to hand type into Cityworks, They asked me if there was a way the two products could talk to each other. We learned that Cityworks and Trimble were offering an integration with E.H. Wachs that could automate existing …

“Adapting to the SX10 was no problem. BAM Contractors use a lot of Trimble equipment and software, including the “S” series robotic total stations, TSC3 data collectors, Dini levels and Trimble Business Center office software.”

“I hit import and I was blown away because I could see every anchor bolt, nut, column, brace and everything in the entire frame.”

“It is difficult to find a qualified dredge operator to work in a mining area. The conditions can be very demanding, and one goal is to support the employee in his work and take the pressure off him so he can be used in other areas.”

“The brand name of Trimble has high value as the company is a well-known GNSS pioneer worldwide. We have been delighted at the opportunity to work together on this important project, and partner locally with Japan-based Nikon-Trimble in making this project successful leading up to the mass production stage.”

“Autonomous operation near a railway, for instance, requires the robot to operate very accurately between the tracks and the sidewalk.”

“We needed two GNSS antennas to ensure accurate heading measurements even in areas with magnetic charge, such as railways. On average, the Vitirover achieves 5 cm accuracy."

“The robot must move fast to handle high traffic flow and precisely to park cars as densely as possible. When looking for an accurate, available and reliable localization solution, Trimble is the company name that comes first.”

“We chose to incorporate the Trimble BD940 receiver into the Routescene Ground Station, to ensure full compatibility with the GNSS receiver in the LidarPod, and because of its ability to output RTK corrections in a variety of different formats. Flexibility and reliability were paramount to us to ensure minimal or …

“We’re investing up front to eliminate a lot of the unknowns and have a clear plan, long before we win the work.”

“We used virtual mock up’s in Tekla & Trimble Connect to reduce risk of project delays and make sure all of the #18 bars were going to fit together with all of the beam rebar and post tensioned cables.”

“Trimble Connect has an incredibly low barrier to entry. It’s easy to access and use, so it opens the door to better collaboration across stakeholders, from the office to the field. With Trimble Connect, anyone can pull up the model and visualize any or all of the disciplines in one …

“Planning the slickline in order to pump concrete was very important. We will be wrapping up level one while pouring concrete up top. Everything has to run smoothly because we are going to get to a point where we will be pumping concrete over 1000 ft high into the building. …

“With Trimble Construction One, we don’t have to worry about purchasing licenses when we want to bring a new team member into a workflow. It’s been easy to scale and bring in other team members.”

“Our goal is to be the most technologically advanced construction company in Ottawa.”