895 Trimble Testimonials

“We reached ROI in less than a year. Right off the bat. MPG jumped by .8, or approximately 15% fuel savings for 10 million miles.”

“Measurements using leveling and plate load is one thing, measurements with the compactor’s compaction meter values is another. The CMV values have gone up and down all the time. We had to do something to find CMV values we can rely on. Very few can do something about this, but in this case we have managed to do it in collaboration between Pon, SITECH, Trimble, Veidekke and competent engineers with the contracting builder."

“One day, my colleague drove 1,000 km just to scan 5-6 towers, so equipment portability and ease of use is important to us.”

“We especially like the accuracy and detail of the components that SysQue facilitates. We’re able to locate anchors and the conduit rack mounts, and then spool and place couplings well in advance. Visualizing the placement of couplings is a huge advantage to our crews. Then, we were able to prefabricate the raceway and deliver it with detailed instruction sheets.”

“After this project, I’m a complete believer in SysQue and having subcontractors use the same model.”

"I'm incredibly pleased with both the features of the tools and the support from Trimble. It feels safe to explore new opportunities and take on demanding projects. If a problem arises, you always find a new way going forward."

“Overall, I would estimate we achieved at least a 10% shared cost savings using SysQue and Revit on the lab build, resulting in about $1 million savings in total. Best of all, it made our customer very, very happy and we now have this streamlined fabrication workflow in place that we’ll leverage and it will make us more competitive going forward.”

"We discovered that our company had a large number of projects in a number of various market sectors, and we were not doing a very good job of capturing historical and as-built costs."

“It takes a surveyor to orient a scan to a specific location on the earth. In the end, I believe that scanning should and will become an everyday part of survey life. I fully expect the scanner to become just another tool on the survey truck."

“It is mind blowing what you can do using Earthworks. It is making the job easier – as we are able to be more precise and efficient. In addition, it’s also engaging me as an operator.”

“Lidar is a game changer and we want to be ahead of the curve. The SX10 provides a good entry point for our crews and office staff to become skilled with scanning.”

“The Trimble FX is perfect for these kinds of measurements. Everything in the  eld of view is measured with the same accuracy. Sometimes details that seem irrelevant during the scan prove to be very important in the design phase. With the Trimble FX, you can be assured that you will never be short of measurements.”

"From a planning and estimating perspective, we believe that it’s best to have local people on the ground with the ability to leverage national resources."

"We found that we can build a model in one-tenth the time it took us using our conventional methods. Instead of 1.5 days, we’re cutting the time it takes to 1.5 hours."

“The survey and analysis enabled engineers to adjust for problems before they occurred. Our work greatly reduced changes in the field that the client might have encountered if forced to use less accurate and comprehensive data.”