“Design tasks that took six hours on a drawing board dropped to about four hours using 2D computer-aided design (CAD), and then to 15 minutes with 3D Solid Edge."

"With Solid Edge 3D design software, we can import a solid model and quickly con- struct the necessary tooling around it."

“Mechanical Desktop was not as comprehensive as we needed and some of the features didn’t work as well as we thought they should.”

"NX CAM is unique in that it allows NC programmers to try different approaches before selecting the best method to machine even the most challenging designs. Programming complex parts is no longer a tedious process. The software provides many advanced options that give the engineers the necessary flexibility to quickly …

“When our engineers tested two methods for the same work piece, the time difference could be up to 20 minutes, so if we make 1,000 pieces a year, the difference would be 20,000 minutes. And that’s only for one part. The enhanced machining efficiency using innovative methods has increased our …

"All of the drafting tasks can easily be done in Solid Edge, which has been a great spur to improving my productivity.”

“Our machines are auxiliary to primary production plants. Our core business is the plastic industry, with additional applications in mechanical engineering, laser processing, biogas production and any area where controlled temperature fluids are required.”

"With material thicknesses of tenths of millimeters, the thin wall command of Solid Edge is critical for thermoforming areas."

“This works from any third-party system and is completely sufficient, because the client models must never be changed.”

"That is why we continue to build our models sequentially. We use the synchronous technology of Solid Edge with its speedy options for direct processing above all for the modification of third- party data."

"There’s nothing like synchronous technology. I think CAD will be changed forever with the introduction of synchronous technology."

"Using synchronous technology allows us to explore considerably more design ideas quickly, without having to go through and individually update each part."

"We started with one license of Solid Edge, and now we have 14 licenses. We also acquired NX and NX Nastran solutions, and with them we have managed to reduce the cycle times in engineering development by 60 percent."

"Due to the direct access to PLM information on the shop floor, our machines’ idle times are significantly reduced, and our colleagues are able to effectively minimize variation in quality and manufacturing errors."

"We are leaders in the realm of simulation for predictive analytics, from 1D and 3D to fluid, thermal and structural co-simulation."