1277 Siemens PLM Testimonials

“The switch to NX and Simcenter software allowed us to perform design and analysis projects that would have previously been impossible. The efficiency with which we can make design changes and verify their performance has dramatically increased.”

“We implemented NX CAM seven years ago because only 3D CAD/CAM systems allowed us to create the NC programs we needed to efficiently and accurately machine the parts required for bridge and structural engineering. We also wanted to promote the use of 3D in design and planning, so we decided to use NX CAD for design purposes in our structural engineering department.”

"NX allows us to significantly reduce the time it takes to handle big assemblies, a big challenge for us in the turbine design. We are seeing significant benefits in having NX as our main CAD system. Its ease of connection with Teamcenter is fundamental."

“During the feasibility studies of hydraulic systems, LMS Imagine.Lab Amesim has saved us a lot of time and programming effort because it is no longer necessary to work on time-consuming equations. In the aeronautical field, planning cycles are very short. As a supplier for a large organization, it is very important for us to do the feasibility studies as quickly as possible.”

“Without a tool like NX, we would not be where we are. It has allowed us to land really big contracts.”

“And with JT2Go…it is possible for us to share detailed information about design and manufacturing, even with those who don’t have access to CAD software.”

“Teamcenter is the essential tool for growth and for industrial development.”

“I use Teamcenter daily. The accuracy of the data that is sent to me is without equal, and any changes made by engineering are made known to us immediately. Overall, by making product data automatically available to the ERP system, we are getting to market significantly faster, in fact, in the neighborhood of 30 percent faster.”

“The ability of Teamcenter to handle complex data relationships provides us with a much more accurate view of information, and it saves us time in searching for information.”

“Solid Edge was a winning move. It offers all the functionalities of a 3D CAD solution: dynamic and cinematic modeling plus simulation and FEM analysis modeling.”

“The great business value of Teamcenter is information traceability and reliability in engineering as well as in production, where we have implemented Teamcenter for manufacturing.”

“The ability to collect analysis data and reports from our operations delivers clear benefits in terms of cycle time and data reliability, as you can re-use previously implemented processes to achieve documented and reliable results.”

“We are working about 30 percent faster, thanks to the increased automation that NX provides.”

“Switching from I-deas to NX… was absolutely worthwhile.”

“We’re very lucky that our management made a wise decision when the company was at a low point to invest in PLM and restructure the entire product development process. This has given us the competitiveness we enjoy today.”