592 3D Systems Testimonials

Industry
Company Size
15 per page
  • 15
Reset
  • “Every feature is more or less conventional, but putting them together in a single compact and competitive mechanism is really a challenge.”

  • “Through the innovative technology of 3D Scanning, I am convinced more about the future and will keep contributing my arts to the new world of Music. Even though my skills are more than 100 years old, I see that it will be preserved and delivered to next generation with better …

  • “GibbsCAM takes care of three turrets very easily—syncs them all up, and it spits out all the wait codes. So we use Sync Manager a lot, every time we program that machine. We have seen cycle time reductions between 50 percent and 75 percent on the machine. The NL lathes …

  • “You position the part and machine it. The coordinate system rotates the part perpendicular to the tool, so you machine in the X-Y plane. I built a standard coordinate system, then one for the slots, and one for each of the two sides. The rest was easy.”

  • “More than 15% of cranial SRS treatments are not as safe and effective as they could be. There’s significant room for greater safety and efficiency — and we believe novel, patient-specific solutions can take us there.”

  • “In looking around, feeling out the market and investigating what people were using for this type of machine, everything we saw and heard pointed to GibbsCAM. So we went with a network license of GibbsCAM.”

  • “I rely on some, such as Machine Simulation and Cut Part Rendering, because they show potential problems before I send a program to the machine. We’ve never had a crash, or gouge, or any problem at the machine.”

  • “The software combination of SOLIDWORKS and GibbsCAM has been fantastic. We model in SolidWorks and store the files in SolidWorks Vault. Programmers retrieve models from the Vault with GibbsCAM and create toolpaths directly off the model or selected geometry. The headlight fixture created a big surge in work from that …

  • “Our [CAM software] representative heard of our tool wear problem and introduced the GibbsCAM VoluMill™ module. With [that module] we were able to increase cutting depth, use a lot more of the insert, and distribute the load on the cutter. Inserts lasted five times longer, and we removed more material …

  • “I had done CNC milling and turning, but putting it all on one machine was challenging at first. With [the CAM software], it didn’t take long to learn the process.”

  • “Hands-down this machine makes parts that are orders of magnitudes better than anything else on the market. The extreme resolution of the 3D prints allows us to manufacture production-quality lenses that demonstrate product performance to our customers before tooling the parts. Numerous customers have accepted a product very quickly after …

  • “It was impressive with the machine tool in its real colors, performing the exact motions going on at the machine.”

  • “Competition in the metal-cutting industry comes from all over the world. The only way to compete in the global market is to find ways to manufacture smarter, faster, and still produce a quality product. The trunnion allowed us to reduce setups by combining multi-machining operations, while at the same time, …

  • “It doesn’t take long to figure out what tools can do, what ramp rates work best for a tool’s geometry. VoluMill doesn’t need to know everything. You just tell it a few things, and it does the rest. You don’t have to worry about it squeaking a tool in a …

  • "3D printed prototypes in our focus groups give the company new levels of confidence in our product lines and benchmark data for our business decisions. We're now confidently backing the winners rather than rolling the dice. We've found a host of unanticipated applications for 3D printing and myriad unanticipated benefits. …