592 3D Systems Testimonials

Industry
Company Size
15 per page
  • 15
Reset
  • “Every feature is more or less conventional, but putting them together in a single compact and competitive mechanism is really a challenge.”

  • “With the quality of the wax material we print with, we get a 100% success rate – every part comes out perfect.”

  • “We came up with another idea recently We started transferring another group of parts to the Integrex, but with these, the grooves don’t start at the end of the part, at the part zero, but at some distance from it. We needed to enter another variable, an offset from the …

  • “And if you can now do 50 cycles it makes a big difference. The quicker we can produce the parts, the quicker our development cycles are, and the more progress we can make in our aerodynamics.”

  • “Conventionally producing the quantity of parts we need for progress would be impossible in the time we have.”

  • "We're moving a lot faster, shaving weeks off our new product introduction cycles, and saving $3,000 per product in machining and moldmaking costs."

  • “The typical lead time for building a tool was 13 weeks, and as long as business was good, it was pretty much business as usual.”

  • "For the things we do, Cimatron is faster and more accurate than any other software. It has opened up new avenues for us to completely change the way we build tools."

  • “3D Systems is not only a supplier for Delfin but a real partner with whom we can co-design and manufacture to satisfy the needs of our main markets: food, chemical and pharma.”

  • “To get 100 rotors from our outside multiple vendor process would take us four months, from start to finish. Now we make 100 rotors in-house in a week. GibbsCAM and the CNC let us do that. We use the rotors in our other pumps with great results. The in-house produced …

  • “We use SolidWorks almost exclusively for design. I can send the model to Doug Nealy, our programmer and machinist who loads it into GibbsCAM, and it’s nearly ready to go. GibbsCAM is very easy to use and very accommodating. We can literally load a part and run. The conventional machines …

  • “Before, we would have to wait weeks. Now I can have a perfect functional part, tested and ready for production, within a couple of hours.”

  • “Each student creates a tile that is 3D printed and connected together. Using the Sense-scans, they reinterpret their own face and connect it with social issues such as sexism, climate change, discrimination, gun control and so on.”

  • “The combination of the ProX DMP 320 and 3D Systems’ knowledge of design for 3D printing made it possible for us to test more design options in much less time.”

  • “We think we can safely say that the integrated functionalities of the 3D printed injector head are superior and the production times and costs lower when compared to stateof-the-art equivalent parts manufactured via conventional methods."