-
“Every feature is more or less conventional, but putting them together in a single compact and competitive mechanism is really a challenge.”
-
“In the old days finding out the material size would have been done by waiting until the dies were prepped to run, setting up the dies in the forge shop, figuring out the billet size and the process of then taking down the setup. Next, we would have to order …
-
“As we prepared the car to run again for the first time in almost 20 years, we noticed severe pitting and corrosion on the water pump. In a few places, the housing was pitted all the way through and was only kept from leaking by mineral deposits that covered the …
-
“3D Systems allows us to design extraordinary forms and shapes out of solid materials. The machines are so precise that there were very few changes to be made going from prototype to production. The only tweaks that were needed were design changes on our end.”
-
“The thing that holds me up the most when we are prototyping is when a part doesn’t come in as advertised. The 3D Systems parts for the G2 P51 came in as we asked for them, in the order in which we asked, on time. The prototype stayed on schedule …
-
“It’s unfathomable for me to explain in words just how much better it is to be free to do something we are really great at, which is design. It’s changed our entire program, not just for the motorcycles we are working on now, but for the four or five new …
-
"Cimatron offers the best performance in Z direction control, which gives us finer, free control of the cutter path. The advanced high-precision machining capabilities we have gained with Cimatron open great potential for us to produce a greater variety of parts."
-
“FreeForm modeling helped us get the WWF line to market faster without sacrificing quality. We’re happy and our client is happy.”
-
“We would be lost without GibbsCAM to program these machines. It seems that part complexity has increased over the years, and the software allows us to keep up.”
-
"3D Systems’ technology transfer and consulting approach has enabled us to support our customers with their design and engineering challenges. We can better help our customers scale their ideas down to keep them printable and bring the benefits of additive manufacturing to their application."
-
“I see reverse engineering with Geomagic software continuing to improve our ability to capture and recreate special design features in our engines and cars. The speed, ease of use, and accuracy of this process make it a natural for meeting the demands of Nextel Cup racing.”
-
"We estimate that our production time using CimatronE has been reduced by 30-35%."
-
“I set my company up with a Fadal VMC 3016 and a GibbsCam package. I did that because I was a medical products designer and because of my belief that a good designer ought to be able to build the the products he designs. I used the equipment to build …
-
"I knew that not all 3D-printing powders and liquids have the same material characteristics as their conventional counterparts. So, I wanted to be able to test a range of materials in the actual environment in which the mold would be used."
-
“In looking around, feeling out the market and investigating what people were using for this type of machine, everything we saw and heard pointed to GibbsCAM. So we went with a network license of GibbsCAM.”